C 3500 Truck 2WD V8-8.1L VIN G (2001)
2. Disconnect the negative battery cables.
3. Remove the battery.
4. Remove the battery tray.
5. Remove the heater hoses from the clip on the wheelhouse.
6. Remove the air cleaner hose bracket.
7. Remove the air conditioning evaporator tube from the clip.
8. Raise and support the vehicle. Refer to Vehicle Lifting.
9. Remove the right front tire and wheel assembly.
10. Remove the fender-to-wheelhouse bolts (3).
11. Remove the two bolts (5, 4) holding the wheelhouse to the cowl mounting brackets (6, 7).
12. Remove the three wheelhouse to the radiator support bolts.
13. Remove the wheelhouse panel from the vehicle.
14. Tilt the panel out of the vehicle.
Installation Procedure
1. Tilt the panel into the vehicle.
Install the wheelhouse panel to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the three wheelhouse to radiator support bolts (4) and the nuts (5).
Tighten the wheelhouse to radiator support bolts to 25 N.m (18 lb ft).