C 3500 Truck 2WD V8-8.1L VIN G (2001)
Seat Back: Service and Repair
Front Seat Back Frame Replacement (Split Bench)
Front Seat Back Frame Replacement (Split Bench)
Removal Procedure
1. Remove the seat from the riser.
2. Remove the headrest and guides.
3. Remove the seat back pad.
Important: Note the position and the length of the bolts removed.
4. Remove the 2 bolts retaining the seat back hinge to the seat back frame (13).
Important: Note the position and the length of the bolts removed.
5. Remove the 2 bolts retaining the seat back recliner to the seat back frame (13).
Important: Complete the following steps ONLY if the seat is equipped with a lumbar support.
*
Remove the seat cushion pad (12).
*
Remove the 2 screws retaining the lumbar cable assembly to the seat cushion frame.
*
Turn the threaded black end of the assembly to expose the retaining slot for the cable.
*
Remove the cable from the assembly.
Remove the seat back frame (13) from the seat assembly.
Installation Procedure
Important: Complete the following steps ONLY if the seat is equipped with a lumbar support.
*
Insert the lumbar adjuster cable into the slot in the assembly.
*
Turn the threaded black end of the assembly until the slot retaining the cable is concealed.
