C 3500 Truck 2WD V8-8.1L VIN G (2001)
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the nut to the threaded end of the intermediate cable.
^
Tighten the nut to 3.5 Nm (31 inch lbs.).
5. Remove the safety stands.
6. Lower the vehicle.
7. Adjust the park brake system.
Right Rear
Park Brake Cable Replacement - Right Rear
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Relieve the tension on the cable by loosening the nut at the equalizer.
4. Disconnect the cable from the equalizer.