C 3500 Truck 2WD V8-8.1L VIN G (2001)
Parking Brake Shoe: Service and Repair
Park Brake Shoe Replacement (25/35 Series)
Park Brake Shoe Replacement (25/35 Series)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and the wheel.
3. Relieve the tension on the park brake cables by loosening the nut at the equalizer.
4. Remove the park brake cable from the park brake actuator lever.
5. Remove the rotor.
6. Remove the park brake shoe return spring (6).
7. Remove the park brake shoe anchor springs and pins (3).
8. Separate the tips of the shoes from the park brake actuator and remove the park brake shoes and adjuster assembly from the vehicle.
Installation Procedure
1. Clean the debris and the dust from the park brake components using a clean shop cloth.
2. Install the adjuster assembly to the park brake shoes.
3. Separate the tips of the shoes and install the park brake shoes to the park brake actuator.
4. Install the park brake shoe anchor springs and pins (3).
5. Install the park brake shoe return spring (6).
6. Adjust the park brake shoe.
7. Install the rotor.
8. Install the park brake cable to the park brake actuator lever.
Notice: Refer to Fastener Notice in Service Precautions.
9. Tighten the nut to the intermediate cable at the equalizer.
^
Tighten the nut to 3.5 Nm (31 inch lbs.).
10. Install the tire and wheel.
