gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Technical Service Bulletins for Camshaft Position Sensor: > < Ignition Relay|Testing and Inspection|Page 7692
Page 1
background image

Camshaft Position Sensor: Customer Interest
Cam Sensor - MIL ON/DTC's P0341, P0342, P0343 Set

File In Section: 06 - Engine/Propulsion System 

Bulletin No.: 01-06-04-012

Date: March, 2001

TECHNICAL

Subject:
Malfunction Indicator Lamp ON with a DTC P0341, P0342, P0343 
(Replace Cam Sensor)

Models:
2001

Chevrolet and GMC C/K and G Light Duty Models

2001

Chevrolet and GMC B7, C6, C7 Medium Duty Models

with 8.1 L Engine (VINs E, G - RP0 L18)

Condition

Some owners may comment that the Malfunction Indicator Lamp (MIL) is illuminated. The vehicle will exhibit no unusual driveability characteristics.

Upon further diagnosis, the technician may find an active or stored DTC P0341, P0342, P0343 in the PCM.

Correction

Verify the cam sensor operation using the appropriate Service Manual diagnostics. If the diagnostics show that the cam sensor is the suspect component,
replace the cam sensor with the following part number. Refer to the applicable Service Manual for removal and installation of the cam sensor.

Parts Information

Parts are currently available from GMSP0.

Warranty Information

For vehicles repaired under warranty, use table shown.

DISCLAIMER

All Technical Service Bulletins for Camshaft Position Sensor: > < Ignition Relay|Testing and Inspection|Page 7692