C 3500 Truck 2WD V8-8.1L VIN G (2001)
Rack and Pinion Boot and Breather Tube Replacement
-
Tools Required
-
J 22610 Service Boot Clamp Installer
Disassembly Procedure
1. To remove the outer tie rod. Refer to Tie Rod End Replacement- Outer.
2. Remove the hexagon jam nut (2) from the inner tie rod assembly (1).
3. Remove the tie rod end clamp (2) from the rack and pinion boot (1).
4. Remove the boot clamp (1) from the rack and pinion boot with side cutters.
5. Discard the boot clamp (1).