C 3500 Truck 2WD V8-8.1L VIN G (2001)
4. Connect the adjuster nut assembly (2) to the steering gear housing (1) using J 42882.
5. Install the coupling shield retainer and the lock nut (1) to the adjuster nut assembly.
6. Refer to Worn Thrust Bearing Preload Adjustment - Off Vehicle to adjust the thrust bearing preload.
7. Hold the adjuster nut assembly in position to maintain alignment of the marks.
Notice: Refer to Fastener Notice in Service Precautions.
8. Tighten the coupling shield retainer and the lock nut using J 43435 and a torque wrench.
-
Tighten the coupling shield retainer and the lock nut to 109 Nm (80 ft. lbs.).