C 3500 Truck 2WD V8-8.1L VIN G (2001)
Caution: Refer to Failure to Prep Primer Caution in Service Precautions.
Important: Do not apply the (black #3 primer to the existing bead of the urethane adhesive. Apply only to nicks, scratches or the primed
surfaces.
17. Shake the pinchweld primer (black #3) for at least 1 minute.
Use a new dauber to apply the pinchweld primer (black #3) to the surface (1) of the bonding area on the body only.
18. Allow the primer to dry for approximately 10 minutes.
Important: Use care when applying prep (clear #1) in the window. This primer dries almost instantly, and may stain the viewing area of
the window if not applied evenly.
19. Use a new dauber in order to apply glass prep (clear #1) to the area approximately 10-16 mm (3/8-5/8 in) around the entire perimeter of the
window inner surface.
20. Apply a second coat of the glass prep number (clear #1) to the same area of the glass.
21. Wipe the glass primed area immediately with a clean lint free cloth.
22. Shake the glass primer (black #2) for at least 1 minute.
23. Use a new dauber in order to apply the glass primer (black #2) to the same areas (2) that glass prep (clear #1) was applied.
24. The glass primer (black #2) is good up to 8 hours after applying it to the glass. The primed surface of the glass must be kept clean.
25. Allow the glass primer to dry for approximately 10 minutes.
