C Yukon 2WD V8-5.7L VIN R (1999)
9.
After the paint has dried, lubricate the surface of the new rivet (1) with grease, GM P/N 1050109 (In Canada use P/N 5264008), or equivalent The
film thickness should be between 0.03-0.30 mm (0.001-0.012 in).
10.
Finger tighten the new detent link (4) with the new washer (2), the rivet (3) and the new nut (1) to the hinge strap
Important:
In the next step, use tape or a suitable covering material in order to protect the door from damage when installing the stud.