C Yukon 2WD V8-5.7L VIN R (1999)
1. Grasp the inside of the ashtray.
2. Pull out the ashtray.
Installation Procedure
1. Push the ashtray into the hole in the trim panel.
2. Armrest Bracket Replacement
Lock Actuator
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the door trim panel.
3. Remove the door water deflector.
4. Remove the door lock actuator.
5. Disconnect the electrical connector.
Installation Procedure
1. Connect the electrical connector.
2. Install the door lock actuator.
3. Install the door water deflector.
4. Install the door trim panel.
5. Connect the negative battery cable.
Lock Cylinder
Removal Procedure
