C Yukon 2WD V8-5.7L VIN R (1999)
4. Install the outer brake pad (3) onto the caliper (1).
^
If it is necessary use a C-clamp to install the pad onto the caliper.
^
Do not allow the C-clamp to come into contact with the lining.
^
Insert a used brake pad between the C-clamp and the new brake lining.
5. File the leading edge of the brake pad tang to aid in the installation of the brake pad to the caliper.
6. Install the caliper.
7. Pump the brakes until the brake pedal is firm before moving the vehicle. Check the brake fluid level in the master cylinder after pumping the
brakes.