C Yukon 2WD V8-5.7L VIN R (1999)
1. Lubricate the caliper and the steering knuckle, or support, sliding surfaces and the spring with Aeroshell #5 or the equivalent.
2. Place the new pad in a vise.
3. Compress the brake pad tangs as necessary to obtain a secure fit between the outer brake pad and the caliper.
4. Install the outer brake pad onto the caliper.
^
Use a C-clamp to install the pad (3) onto the caliper (1) if it is necessary.
^
Do not allow the C-clamp to come in contact with the lining.
^
Insert a used brake pad between the C-clamp and the new brake lining.
