C Yukon 2WD V8-5.7L VIN R (1999)
Brake Hose/Line: Service and Repair
Brake Hose Replacement - Front
REMOVAL PROCEDURE
1. Clean the hose fittings at both ends. Remove all dirt, grease, and other foreign material.
2. Disconnect the steel pipe.
3. Remove the clip.
4. Remove the bolt and the washers.
5. Remove the brake hose.
INSTALLATION PROCEDURE
IMPORTANT: Use new copper washers when installing the brake hose.
IMPORTANT: After installation, the brake hose must not be twisted. The brake hose must not contact any other components.
