C Yukon 2WD V8-5.7L VIN R (1999)
Idler Pulley: Service and Repair
REMOVAL PROCEDURE
1. Remove the drive belt. Refer to Drive Belt Replacement
2. Remove the belt idler pulley bolt.
3. Remove the belt idler pulley.
INSTALLATION PROCEDURE
NOTICE: Refer to Fastener Notice in Service Precautions.
1. Install the belt idler pulley and bolt to the power steering bracket.
-
Tighten the bolt to 50 Nm (37 ft. lbs.).
2. Install the drive belt. Refer to Drive Belt Replacement.
