C Yukon 2WD V8-5.7L VIN R (1999)
13. Install the PCV valve.
14. Connect the Exhaust Gas Recirculation (EGR) pipe to the bracket and the front of the intake manifold. Refer to Sec Air Injection Check
Valve/Pipes Replacement in Powertrain Managements.
15. Use a twisting motion to install the vacuum brake booster hose, if equipped.
16. Install AIR check valve (crossover) pipe, if equipped. Refer to Sec Air Injection Check Valve/Pipe Replacement in Powertrain Managements.
17. Install the Air Conditioning (A/C) compressor onto the power steering bracket.
18. Install the A/C compressor bolts.
-
Tighten the bolts to 50 Nm (37 ft. lbs.).
19. Install the drive belt. Refer to Drive Belt Replacement.
20. Connect the accelerator control cable and the cruise control cable, if equipped. Refer to Accelerator Controls Cable Replacement in Powertrain
Managements.
21. Install the distributor. Refer to Distributor Replacement.
22. Connect all electrical connectors.
23. Install the following coolant hoses.
