C Yukon 2WD V8-5.7L VIN R (1999)
7. Install the PCV valve hose assembly.
8. Install the distributor cap. Refer to Distributor Replacement in Powertrain Management.
9. Connect the fuel pipes to the rear of the engine. Refer to Fuel Hose/Pipes Assembly Replacement (Fuel Pipes Side Tank) in Powertrain
Managements.
10. Install the AIR check valve (crossover) pipe, if so equipped. Refer to Sec Air Injection Check Valve/Pipe Replacement in Powertrain
Managements.
11. Connect the electrical connectors.
12. Install the accelerator control cable bracket.
13. Connect the accelerator control cable and the cruise control cable, if equipped. Refer to Accelerator Controls Cable Replacement in Powertrain
Managements.
14. Install the vacuum brake booster hose, if equipped.
15. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Powertrain Managements.
16. Connect the battery negative cable. Refer to Battery Cable in Powertrain Management.