C Yukon 2WD V8-5.7L VIN R (1999)
Tighten
Tighten the screws to 1.6-2.8 N.m (14-25 lb in)
IMPORTANT: The locating tabs on the rotor are necessary for correct alignment of the rotor. If the tabs are missing or damaged, replace the rotor.
4. Install the rotor onto the reluctor wheel.
5. Install new rotor screws.
Tighten
Tighten the screws to 1.5-2.4 N.m (13-22 lb in)
6. Install the distributor cap.
