C Yukon 2WD V8-5.7L VIN R (1999)
Tighten
Tighten the bolt to 55 N.m (41 lb ft).
8. Install the cover onto the rear seat access panel.
Removal Procedure
1. Remove the bolt retaining the shoulder/seat belt guide to the guide adjuster.
2. Remove the shoulder/seat belt guide from the guide adjuster.
3. Remove the front door upper pillar garnish molding.
4. Remove the shoulder/seat belt guide adjuster retaining bolts from the pillar.
5. Remove the shoulder/seat belt guide adjuster from the vehicle.
Installation Procedure
1. Install the shoulder/seat belt guide adjuster to the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the shoulder/seat belt guide adjuster retaining bolts to the pillar.
Tighten
Tighten the shoulder/seat belt guide adjuster retaining bolts to 52 N.m (38 lb ft).
3. Install the shoulder/seat belt guide to the guide adjuster.
4. Install the shoulder/seat belt guide retaining bolt to the guide adjuster.
Tighten
Tighten the shoulder/seat belt guide retaining bolt to 52 N.m (38 lb ft).