Canyon 2WD L4-2.9L (2008)
1. Install the rear shield to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the rear shield bolts (1).
Tighten the bolts to 75 N.m (55 lb ft).
3. Install the rear shield bolts (2).
Tighten the bolts to 20 N.m (15 lb ft).
4. Install the front shield to the vehicle.
5. Install the front shield bolts (1).
Tighten the bolts to 60 N.m (44 lb ft).