Canyon 2WD L4-2.9L (2008)
1. Position the console to the floor panel.
2. Ensure the retainers are indexed to the corresponding holes in the floor panel.
3. Push downward on the console seating the retainers.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the seat track bolts on both front seats.
Tighten the bolts to 53 N.m (39 lb ft).
5. Attach the retaining strips on the shift lever bezel.
Console Shift Lever Bezel Replacement
Console Shift Lever Bezel Replacement
Removal Procedure
1. Separate the retaining strips on the shift lever boot.
2. Lift upward on the shift lever bezel to release the retaining tabs.
3. Lift the bezel and boot over the shift lever.