Canyon 2WD L4-2.9L (2008)
3. Install the seat belt buckles (1) through the seat cover loops (2).
4. Install the rear bench seat in the vehicle. Refer to Rear Bench Seat Replacement (See: Service and Repair/Rear Bench Seat Replacement) .
Rear Seat Cushion Cover and Pad Replacement (Extended Cab)
Rear Seat Cushion Cover and Pad Replacement (Extended Cab)
Removal Procedure
1. Remove the rear folding seat cushion from the vehicle. Refer to Folding Seat Replacement (Extended Cab) (See: Service and Repair/Folding Seat
Replacement (Extended Cab)) .
2. Release the J-strips (2) on the cover (1).
3. Remove the seat cushion cover from the seat frame/pad.
Installation Procedure