Canyon 2WD L4-2.9L (2008)
Brake Master Cylinder: Removal and Replacement
Master Cylinder Reservoir Replacement
Master Cylinder Reservoir Replacement
Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Caution) .
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid
Effects on Paint and Electrical Components Notice) .
1. Remove the master cylinder from the vehicle. Refer to Master Cylinder Replacement (See: Master Cylinder Replacement) .
2. Secure the master cylinder in a vise. Do not clamp the master cylinder body, secure only at the flange.
3. Carefully remove the brake master cylinder reservoir retaining pins.
4. Remove the reservoir from the master cylinder by pulling the reservoir straight up and away from the cylinder.
5. Remove the seals from the master cylinder.
Installation Procedure
