Canyon 2WD L4-2.9L (2008)
2. Install the J 44221 with the camshaft flats up and the #1 piston at TDC.
3. Install the intake and exhaust camshafts to their original positions.
4. Observe the markings on the camshaft caps. Each camshaft cap is marked in order to identify its location. The markings have the following
meanings:
*
The arrow should point to the front of the engine.
*
The number indicates the position from the front of the engine.
*
The "E" indicates the exhaust camshaft.
*
The "I" indicates the intake camshaft.