Canyon 2WD L4-2.9L (2008)
1. Position drive belt idler pulley to the engine.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the bolts securing the drive belt idler pulley to the engine.
Tighten the bolts in sequence to 50 N.m (37 lb ft).
3. Install the A/C suction hose to the compressor. Refer to Suction Hose Replacement (LLV - 2.9L, LLR - 3.7L) (See: Heating and Air
Conditioning/Hose/Line HVAC/Service and Repair/Suction Hose Replacement).
4. Install the A/C discharge hose to the compressor. Refer to Discharge Hose Replacement (LLV - 2.9L, LLR - 3.7L) (See: Heating and Air
Conditioning/Hose/Line HVAC/Service and Repair/Discharge Hose Replacement).
5. Install the left wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair).
6. Install the drive belt. Refer to Drive Belt Replacement (See: Drive Belt/Service and Repair).
