Canyon 2WD L4-2.9L (2008)
12. Remove the oil filter.
13. Ensure that the oil filter gasket is still on the old oil filter, if not remove the oil filter gasket from the adapter.
Installation Procedure
1. Apply clean engine oil to the NEW oil filter gasket.
Notice: Refer to Component Fastener Tightening Notice (See: Service Precautions/Vehicle Damage Warnings/Component Fastener Tightening
Notice).
2. Install the NEW oil filter.
Tighten the oil filter to 10 N.m (89 lb in), plus an additional 150 degrees.
3. Wipe any excess oil from the oil filter drain deflector.
4. Tighten the oil pan drain plug.
