Canyon 2WD L4-2.9L (2008)
Timing Chain Tensioner: Service and Repair
Timing Chain Tensioner Replacement
Timing Chain Tensioner Replacement
Special Tools
J 44221 Camshaft Holding Tool
Removal Procedure
1. Remove the camshaft cover. Refer to Camshaft Cover Replacement (See: Cylinder Head Assembly/Valve Cover/Service and Repair).
2. Remove the engine front cover. Refer to Engine Front Cover Replacement (See: Timing Cover/Service and Repair).
3. Rotate the crankshaft in the engine rotational direction clockwise, until the #1 piston is at top dead center (TDC) on the compression stroke.
Caution: Refer to Camshaft Holding Tool Caution (See: Service Precautions/Vehicle Damage Warnings/Camshaft Holding Tool Caution).
4. Install the J 44221 to the rear of the camshafts.