Canyon 2WD L4-2.9L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the bolt (1) to the receiver dehydrator.
Tighten the nut to 28 N.m (21 lb ft).
4. Install the evaporator tube retaining clip to the front of the condenser.
5. Install the grille. Refer to Grille Replacement (See: Body and Frame/Grille/Service and Repair) .
6. Install the evaporator tube to the retaining clips (1) on the fender.
