Canyon 2WD L4-2.9L (2008)
9. Reposition the carpet.
10. Remove rear floor duct. Refer to Rear Floor Air Outlet Replacement (See: Air Register/Service and Repair/Rear Floor Air Outlet Replacement) .
11. Remove the HVAC module retaining nuts from the cowl.
12. Remove the HVAC module assembly.
Installation Procedure
1. Install the HVAC module assembly.
2. Install the HVAC module retaining nuts from the cowl.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Tighten the HVAC module retaining nuts.
Tighten the nut to 4.5 N.m (40 lb in).
4. If replacing the HVAC module assembly (8), transfer the components from the old HVAC module assembly as necessary.
5. Install the HVAC module assembly (8).
6. Install rear floor duct. Refer to Rear Floor Air Outlet Replacement (See: Air Register/Service and Repair/Rear Floor Air Outlet Replacement) .
7. Reposition the carpet.
8. Install the radio antenna to the HVAC module.
9. Connect the heater hose quick connects (2) and (3) to the heater core.
