Canyon 2WD L4-2.9L (2008)
1. Coat the new filter seal with clean automatic transmission fluid.
2. Install the new filter seal into the transmission case. Tap the seal into place using a suitable size socket.
3. Install the new filter into the case.
4. Install the oil pan and a new gasket.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
5. Install the oil pan bolts.
Tighten the oil pan to transmission case bolts alternately and evenly to 16 N.m (12 lb ft).
6. Remove the container used to catch the used transmission fluid from under the vehicle.
