Canyon 2WD L4-2.9L (2008)
1. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the heater outlet hose fitting threads.
Notice: Refer to Fastener Notice.
2. Install the heater outlet hose fitting.
Tighten the heater outlet hose fitting to 45 N.m (33 lb ft).
3. Install the heater hose inlet to the heater pipe outlet.
4. Using the J 38185, reposition the heater hose inlet clamp to the heater pipe outlet.
5. Fill the engine cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair)Cooling System Draining and Filling (Vac N Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair) .