Canyon 2WD L4-2.9L (2008)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank
Evaporative Emission Hoses/Pipes Replacement - Canister/Fuel Tank
Removal Procedure
Caution: Refer to Fuel and Evaporative Emission Pipe Caution (See: Service Precautions/Technician Safety Information/Fuel and Evaporative
Emission Pipe Caution) .
Caution: Refer to Gasoline/Gasoline Vapors Caution (See: Fuel Delivery and Air Induction/Fuel/Service Precautions/Gasoline/Gasoline Vapors
Caution) .
Notice: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice (See: Service Precautions/Vehicle Damage Warnings) .
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar
Quick Connect Fitting Service) in order to disconnect the evaporative emission (EVAP) hoses (1, 3) from the following:
*
The EVAP canister (5)
*
The vent valve
3. Disengage the EVAP hose (3) from the retaining clip on the fuel tank.
Installation Procedure
1. Secure the EVAP hose (3) to the retaining clip on the fuel tank.
2. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar
Quick Connect Fitting Service) in order to connect the EVAP hoses (1, 3) to the following:
