Canyon 2WD L4-2.9L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the 2 fasteners retaining the PSIR bracket to the I/P structure.
Tighten the fasteners to 9 N.m (80 lb in).
3. Install the I/P assembly. Refer to Instrument Panel Assembly Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair) .
4. Position the PSIR inflator module to the front of the I/P and connect the electrical connector.
5. Connect the CPA.
6. Install the PSIR inflator module to the I/P.