Canyon 2WD L4-2.9L (2008)
Impact Sensor: Service and Repair
Inflatable Restraint Vehicle Rollover Sensor Replacement
Inflatable Restraint Vehicle Rollover Sensor Replacement
Removal Procedure
Caution: Refer to SIR Caution (See: Service Precautions/Technician Safety Information/SIR Caution) .
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag(s) Arming and Disarming/Service and Repair) .
2. Fold back the carpet in order to gain access to the sensor. Refer to Floor Panel Carpet Replacement (See: Body and Frame/Interior Moulding /
Trim/Carpet/Service and Repair) .
3. Disconnect the electrical connector.
4. Remove the nuts securing the rollover sensor to the floor panel.
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
1. Install the nuts securing the rollover sensor to the floor panel.
Tighten the screws to 10 N.m (88 lb in).
2. Connect the electrical connectors.
3. Install the carpet. Refer to Floor Panel Carpet Replacement (See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair) .
4. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag(s) Arming and Disarming/Service and Repair) .