gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Seat Occupant Sensor > < Inflatable Restraint Front End Sensor Replacement|Page 18806
Page 2
background image

4. Install the screws which retain the side impact sensor to the door.

Tighten the screws to 9 N.m (79 lb in).

5. Fully seat the water deflector to the door.
6. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement  (See: Body and Frame/Doors, Hood and Trunk/Doors/Front

Door/Front Door Panel/Service and Repair) .

7. Enable the SIR system. Refer to SIR Disabling and Enabling  (See: Air Bag(s) Arming and Disarming/Service and Repair) .

Seat Occupant Sensor > < Inflatable Restraint Front End Sensor Replacement|Page 18806