Canyon 2WD L4-2.9L (2008)
3. Connect the electrical connector to the retractor/pretensioner.
4. Install the front seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten the front seat belt upper guide bolt to 52.5 N.m (39 lb ft).
5. Install the front seat belt upper guide shoulder bolt trim cover.
6. Install the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair) .
7. Install the front seat belt anchor bolt. Ensure that the seat belt webbing is not twisted.
Tighten the front seat belt anchor bolt to 52.5 N.m (39 lb ft).
8. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag(s) Arming and Disarming/Service and Repair) .
