Canyon 2WD L4-2.9L (2008)
Notice: Refer to Fastener Notice.
2. Install the bolt which retains the seat belt retractor assembly to the body.
Tighten the rear seat belt retractor bolt to 52.5 N.m (39 lb ft).
3. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten the rear seat belt upper guide bolt to 52.5 N.m (39 lb ft).
4. Install the rear seat belt upper guide shoulder bolt trim cover.
5. Install the body rear corner trim panel. Refer to Body Side Rear Lower Trim Panel Replacement (Crew Cab) (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair)Body Side Rear Lower Trim Panel Replacement (Extended Cab) (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair)Body Side Rear Lower Trim Panel Replacement (Regular Cab) (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair) .
6. Install the rear seat belt anchor bolt. Ensure that the seat belt webbing is not twisted.
Tighten the rear seat belt anchor bolt to 52.5 N.m (39 lb ft).
Seat Belt Latch Stop Installation
Seat Belt Latch Stop Installation
