Canyon 2WD L4-2.9L (2008)
12. Connect the engine wiring harness electrical connector (1) to the generator battery control module.
13. Install the engine wiring harness clip (2) to the upper battery box.
14. Install the positive battery cable (4) to the battery.
15. Tighten the positive battery cable nut (3).
Tighten the nut to 9 N.m (80 lb in).
16. Close the protective cover to access the positive battery cable terminal.
17. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: ) .
