Canyon 2WD L4-2.9L (2008)
Steering Gear: Service and Repair
Steering Gear Rack Bearing Preload Adjustment - Off Vehicle
Steering Gear Rack Bearing Preload Adjustment - Off Vehicle
Special Tools
J 45059 Angle Meter
1. Loosen the adjuster plug lock nut (1).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Tighten the adjuster plug.
For vehicles with allen head adjuster plug:
*
Tighten the adjuster plug to 15 N.m (11 lb ft).
*
Use J 45059 to back off the adjuster plug 25 degrees.
For vehicles with hex head adjuster plug:
*
Tighten the adjuster plug to 12 N.m (106 lb in).
*
Use J 45059 to back off the adjuster plug 105 degrees.
3. Tighten the adjuster plug lock nut (1) to the steering gear housing.
Hold the adjuster plug stationary while tightening the adjuster plug lock nut (1) to 60 N.m (44 lb ft).