Canyon 2WD L4-2.9L (2008)
Steering Wheel: Service and Repair
Steering Wheel Replacement
Tools Required
J 42640 Steering Column Anti-Rotation Pin
Removal Procedure
1. Set the front wheels in the straight-ahead position.
2. Lock the steering column through the access hole in the lower steering column trim cover using anti-rotation pin J 42640.
3. Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement (See: Restraint
Systems/Air Bag Systems/Air Bag/Service and Repair) .
4. Make alignment marks in order to note the relationship between the steering wheel and the steering shaft.
5. Loosen the steering wheel nut 2 complete rotations.
6. Carefully pull on the steering wheel until it comes loose from the steering column.
7. Remove the steering wheel nut (2).
8. Remove the steering wheel from the steering column using caution to guide the electrical connectors (1,3) through it without damaging them.
Installation Procedure
Notice: Improper alignment of the steering wheel to the steering column shaft will cause vehicle damage. In order to prevent vehicle damage, ensure
that the steering wheel is properly indexed to the steering column before tightening the steering wheel nut.
