Canyon 2WD L4-2.9L (2008)
2. Hand tighten the lower link nut (1) at the lower control arm.
3. Hand tighten the link nut at the stabilizer shaft (2).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Using the proper size wrench to hold the link ball stud, tighten the link nut.
Tighten the link ball stud nut to 44 N.m (32 lb ft).
5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair)
6. Remove the support and lower the vehicle.