Canyon 2WD L4-2.9L (2008)
1. Install the shackle assembly to the spring.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the shackle nut and bolt to the spring.
Tighten the rear shackle nut to 85 N.m (63 lb ft).
3. Install the shackle nut and bolt to the frame
Tighten the shackle nut to 85 N.m (63 lb ft).
4. Remove the rear axle support.
5. Lower the vehicle.