Canyon 2WD L4-2.9L (2008)
Shift Cable: Service and Repair
Range Selector Lever Cable Bracket Replacement
Range Selector Lever Cable Bracket Replacement
Removal Procedure
1. Ensure the vehicle is in the PARK position.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
Important: Do not pull on the boot portion of the cable.
3. Complete the following in order to disconnect the range selector cable (3) from the transmission range selector lever ball stud.
1. Insert a flat-bladed tool between the range selector cable end (5) and the range selector lever (1).
2. Pry the range selector cable end (5) away from the range selector lever (1).
4. Remove the retainer (4) from the range selector cable (3).
5. Push the range selector cable locking tabs inward toward each other to release from the bracket (2).
