Canyon 2WD L4-2.9L (2008)
11. Install the propeller shaft.
*
For vehicles equipped with one piece propeller shafts, refer to One-Piece Propeller Shaft Replacement (See: Drive/Propeller Shafts, Bearings
and Joints/Drive/Propeller Shaft/Service and Repair/One-Piece Propeller Shaft Replacement) .
*
For vehicles equipped with two piece propeller shafts, refer to Two-Piece Propeller Shaft Replacement (See: Drive/Propeller Shafts, Bearings
and Joints/Drive/Propeller Shaft/Service and Repair/Two-Piece Propeller Shaft Replacement) .
12. Install the brake drums. Refer to Brake Drum Replacement (See: Brakes and Traction Control/Drum Brake System/Brake Drum/Service and
Repair/Removal and Replacement) .
13. Inspect and add axle lubricant to the axle housing, if necessary. Refer to Rear Axle Lubricant Replacement (8.0 Inch Axle) (See: Fluid -
Differential/Service and Repair/Removal and Replacement/Rear Axle Lubricant Replacement (8.0 Inch Axle))Rear Axle Lubricant Replacement
(8.6 Inch axle) (See: Fluid - Differential/Service and Repair/Removal and Replacement/Rear Axle Lubricant Replacement (8.6 Inch Axle)) .
14. Lower the vehicle.