Canyon 2WD L4-2.9L (2008)
Center Support: Service and Repair
Propeller Shaft Center Support Bearing Replacement
Tools Required
*
J 37372 Bearing Installer
*
J 44749 Split Plate
Removal Procedure
1. Remove the propeller shaft. Refer to Two-Piece Propeller Shaft Replacement (See: Drive/Propeller Shaft/Service and Repair/Two-Piece Propeller
Shaft Replacement) .
2. Mark the relationship of the yoke to the driveshaft.
3. Mark the relationship of the U-Joint to the yoke.
4. Remove the U-Joint from the yoke.
