Canyon 2WD L4-2.9L (2008)
1. Install the shift lever assembly to the control lever, aligning the set screw threaded hole with the seat (3).
2. Apply threadlock GM P/N 12345493 (Canadian P/N 10953488) to the shift lever set screw threads.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the shift lever set screw.
Tighten the shift lever set screw to 25 N.m (18 lb ft).
4. Push downward on the bezel in order to engage the bezel retainers (2) with the console (3).
