Canyon 2WD L5-3.5L VIN 6 (2004)
Rear Door Interior Handle: Service and Repair
Door Handle Replacement Rear Side Access - Inside
Door Handle Replacement Rear Side Access - Inside
Tools Required
J 9886-01 Door Handle Clip Remover or equivalent
Removal Procedure
1. Open the front and rear side access door.
2. Remove the spring clip retaining the rear side access door handle by inserting J 9886-01 between the door handle, and the door, and pressing the
spring clip off the door handle.
3. Remove the rear side access door handle from the door.
Installation Procedure
1. Install the spring clip onto the rear side access door handle.