Canyon 2WD L5-3.5L VIN 6 (2004)
Hood Insulator / Pad: Service and Repair
Hood Insulator Replacement
Removal Procedure
1. Open the hood.
2. Remove the hood insulator push-in retainers (2) using a door trim pad and garnish clip remover tool.
3. Remove the hood insulator from the hood.
Installation Procedure
1. Install the hood insulator to the hood support brackets.
2. Align the hood insulator retainers holes to the holes in the hood.
3. Install the push-in retainers (2) to the hood.
4. Close the hood.
