Canyon 2WD L5-3.5L VIN 6 (2004)
1. Align the front seat cushion outer trim panel to the seat assembly.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 3 seat cushion outer trim panel mounting screws.
Tighten the front seat cushion outer trim panel screws to 1.5 N.m (13 lb in).
3. Install the seat back recliner handle.
Seat Cushion Cover and Pad Replacement - Front
Seat Cushion Cover and Pad Replacement - Front
Removal Procedure
1. Remove the seat from the vehicle.
2. Remove the cupholder from the seat by pulling it straight off the bracket.
3. Remove the front seat cushion outer trim panel.
