Canyon 2WD L5-3.5L VIN 6 (2004)
5. Install a large C-clamp over the top of the brake caliper housing and against the back of the of the outboard brake pad.
6. Slowly tighten the C-clamp until the pistons are fully seated in the brake caliper bore.
7. Remove the C-clamp from the brake caliper.
Important: It is not necessary to remove the slide pins to remove the brake pads.
8. Remove the lower brake caliper mounting bolt.
9. Rotate the brake caliper upward until it stops on the brake caliper mounting bracket.
