Canyon 2WD L5-3.5L VIN 6 (2004)
Vacuum Brake Booster: Service and Repair
Vacuum Brake Booster Replacement
Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Component Notice in Service Precautions.
1. Remove the master cylinder assembly.
2. Remove the knee bolster trim panel.
3. Remove the retaining clip for the pushrod for the brake booster.
4. Remove the clevis pin.
5. Remove the pushrod from the brake pedal.
6. Remove the mounting nuts for the brake booster.